ADA Height Requirements for Grab Bars By The Toilet.
There is a lot to know about ADA Height Requirements for grab bars by the toilet. Keep in mind that the measurements should be taken from the top edge of the grab bar and to the centerline of the mounting flange. OC Grab Bars is a full-service installation service to install grab bars for you. If this is confusing to you and too much for you to handle on your own, please give us a call for a FREE quote to supply and install grab bars for you. Contact Us Now!
Figure 29(a) Back Wall. A 36 inches (915 mm) minimum length grab bar, mounted 33-36 inches (840-915 mm) above the finish floor, is required behind the water closet. The grab bar must extend at least 12 inches (305 mm) from the centerline of the water closet toward the side wall and at least 24 inches (610 mm) from the centerline of the water closet toward the open side.
Figure 29(b) Side Wall. A 42 inches (1065 mm) minimum length grab bar is required on the side wall, spaced a maximum of 12 inches (305 mm) from the back wall and extending a minimum of 54 inches (1370 mm) from the back wall at a height of 33-36 inches (840-915 mm). The toilet paper dispenser shall be mounted below the grab bar at a minimum height of 19 inches (485 mm). The height of the toilet seat shall be 17 to 19 inches (430 – 485 mm) above the finished floor.
Fig. 29
Grab Bars at Water Closets
Figure A6. Wheelchair Transfers.
A6(a). Diagonal Approach. Shows a person using a wheelchair approaching a water closet or toilet (toilet) from the front and turning to the left to position the wheelchair at a diagonal to the water closet or toilet. The centerline toilet is shown as 18 inches (455 mm) from the closest side wall. The edge of the clear floor space on the opposite side of the toilet is shown as 18 – 30 inches (455 – 760 mm) from the edge of the clear floor space to the centerline of the toilet. Four illustrations show the transfer from the wheelchair to the seat of the toilet. In (1), the user takes a transfer position, swings footrest out of the way, and sets brakes. In (2), the user removes the armrest closest to the toilet, and transfers by pivoting counterclockwise and moving from the wheelchair seat towards the toilet seat. In (3), the user moves the wheelchair out of the way and changes position (some people fold chair or pivot it 90 degrees to the toilet). In (4), the user positions on toilet, and releases brake.
A6(b). Side Approach. Shows a person using a wheelchair positioned to one side of a toilet. The back of the wheelchair is facing the wall that is behind the toilet. In the figure, the toilet is to the left of the wheelchair user. The centerline toilet is shown as 18 inches (455 mm) from the closest side wall. The edge of the clear floor space on the opposite side of the toilet is shown as 42 inches (1065 mm) from the edge of the clear floor space to the centerline of the toilet. Three illustrations show the transfer from the wheelchair to the toilet. In (1), the user takes the transfer position adjacent to the toilet, removes the armrest closest to the toilet and sets brakes. In (2), the user transfers from the wheelchair to the seat of the toilet by sliding sideways from the wheelchair seat onto the toilet seat. In (3), the user positions on the toilet seat. The wheelchair remains positioned beside the toilet.
Fig. A6
Wheelchair Transfers
OC Grab Bars is a full-service installation service to install grab bars for you. If this is confusing to you and too much for you to handle on your own, please give us a call for a FREE quote to supply and install grab bars for you. Contact Us Now!
Sourced from: https://www.ada.gov/reg3a.html – https://ocgrabbars.com/